scooterCode: B74Universal Baseline

Yamaha XMAX 300(2023–present)

Official service intervals, fluid capacities, and torque specifications for the Yamaha XMAX 300. Source citation: Universal motorcycle maintenance baseline • Factory manual pending review.

Quick Reference Specifications

Essential technical numbers for regular maintenance and routine oil changes

Engine Oil Type
10W-30 or 10W-40 Scooter Oil (JASO MB / MA)
Oil Capacity
0.8–1.0 L (refer to dipstick)
Drain Bolt Torque
Not specified in source
Spark Plug
Standard spark plug per OEM spec
Spark Plug Gap
0.7–0.9 mm (0.028–0.035 in)
Service Interval
5,000 km (3100 mi) / 12 mo
Cold Tire Pressures (Front / Rear)
Front: 200 kPa (29 psi)Rear: 225 kPa (33 psi)

Periodic Maintenance Schedule

Recommended factory inspection and replacement intervals under normal riding conditions

Service ItemActionDistance IntervalTime IntervalNotes / Source
Engine Oil
replace5,000 km(3,000 mi)12 moRecommended interval for standard scooter riding conditions
Transmission / Final Drive Oil
replace10,000 km(6,000 mi)24 moGeneral recommendation
Drive V-Belt
inspect8,000 km(5,000 mi)—General recommendation
Drive V-Belt
replace20,000 km(12,000 mi)—General recommendation
Spark Plug
inspect5,000 km(3,000 mi)12 moGeneral recommendation
Spark Plug
replace10,000 km(6,000 mi)24 moGeneral recommendation
Air Filter Element
inspect5,000 km(3,000 mi)—General recommendation
Air Filter Element
replace15,000 km(9,000 mi)—General recommendation
Brake Fluid (DOT 4)
replace—24 moReplace every 2 years
Brake Pads & Shoes
inspect5,000 km(3,000 mi)6 moGeneral recommendation
Steering Head Bearings
inspect10,000 km(6,000 mi)12 moGeneral recommendation

Technical Specifications & Torque Values

Factory torque limits, fluid viscosities and adjustment clearances

Fluids & LubricantsViscosity & Capacities

Recommended Engine Oil10W-30 or 10W-40 Scooter Oil (JASO MB / MA)
Engine Oil CapacityRefer to engine stamping / dipstick

Fastener TorquesN·m (ft-lb)

Oil Drain Bolt TorqueNot specified in source
Spark Plug TorqueNot specified in source

Engine & IgnitionClearances & Gaps

Valve ClearanceNot specified in source

Chassis & TiresPressures & Sizing

Front Tire Pressure200 kPa (29 psi)
Rear Tire Pressure225 kPa (33 psi)
Source & Provenance: Universal motorcycle maintenance baseline • Factory manual pending review
Status: baseline confidence

Titlemark maintains strict citations for all technical figures. Where factory service manuals are pending audit, conservative baseline service intervals are displayed and bolt torques are explicitly marked as "Not specified in source" to prevent overtightening.

Never miss a service on your XMAX 300.

Track wear bars, log mileage, and generate a tamper-evident maintenance passport that proves your bike's care when it is time to sell.