Yamaha MT-07(2014–2017)
Official service intervals, fluid capacities, and torque specifications for the Yamaha MT-07. Source citation: Yamaha Motor Co. MT-07 (FZ-07) Official Factory Service Manual.
Quick Reference Specifications
Essential technical numbers for regular maintenance and routine oil changes
- Engine Oil Type
- 10W-40 Yamalube (API SG or higher / JASO MA2)
- Oil Capacity
- 2.6 L (2.75 US qt) with filter / 2.3 L without filter / 3.0 L overhaul
- Drain Bolt Torque
- 43 N·m (31 lbf·ft)
- Spark Plug
- NGK LMAR8A-9
- Spark Plug Gap
- 0.8–0.9 mm (0.031–0.035 in)
- Service Interval
- 10,000 km (6200 mi) / 12 mo
- Cold Tire Pressures (Front / Rear)
- Front: 250 kPa (36 psi)Rear: 290 kPa (42 psi)
Periodic Maintenance Schedule
Recommended factory inspection and replacement intervals under normal riding conditions
| Service Item | Action | Distance Interval | Time Interval | Notes / Source |
|---|---|---|---|---|
Initial Break-in Service (Oil & Filter)Break-in | replace | 1,000 km(600 mi) | 1 mo | Initial factory break-in service |
Engine Oil & Filter | replace | 10,000 km(6,000 mi) | 12 mo | 2.6 L with spin-on filter (17 N·m) |
Drive ChainBreak-in | clean | 800 km(500 mi) | 1 mo | Clean, lubricate and check slack (51–56 mm from swingarm) |
Spark Plugs | inspect | 10,000 km(6,000 mi) | 12 mo | Factory manual requirement |
Spark Plugs | replace | 20,000 km(12,000 mi) | 24 mo | NGK LMAR8A-9 |
Air Filter Element | replace | 20,000 km(12,000 mi) | — | Factory manual requirement |
Throttle Body Synchronization | adjust | 10,000 km(6,000 mi) | — | Factory manual requirement |
Valve Clearance | inspect | 40,000 km(24,000 mi) | — | In 0.11–0.20 mm / Ex 0.24–0.30 mm |
Brake Fluid (DOT 4) | replace | — | 24 mo | Replace every 2 years |
Coolant | replace | 36,000 km(22,500 mi) | 36 mo | Factory manual requirement |
Steering Head Bearings | inspect | 20,000 km(12,000 mi) | 24 mo | Factory manual requirement |
Technical Specifications & Torque Values
Factory torque limits, fluid viscosities and adjustment clearances
Fluids & LubricantsViscosity & Capacities
Fastener TorquesN·m (ft-lb)
Engine & IgnitionClearances & Gaps
Chassis & TiresPressures & Sizing
Titlemark maintains strict citations for all technical figures. Where factory service manuals are pending audit, conservative baseline service intervals are displayed and bolt torques are explicitly marked as "Not specified in source" to prevent overtightening.
Never miss a service on your MT-07.
Track wear bars, log mileage, and generate a tamper-evident maintenance passport that proves your bike's care when it is time to sell.