scooterCode: i-GetFactory Verified Manual

Vespa Sprint 150(2017–2023)

Official service intervals, fluid capacities, and torque specifications for the Vespa Sprint 150. Source citation: Piaggio & C. SpA Vespa Sprint 150 (i-Get) Official Workshop Manual.

Keep this schedule for your Sprint 150 in Titlemark →

Quick Reference Specifications

Essential technical numbers for regular maintenance and routine oil changes

Dual Metric / Imperial

Engine Oil Type: 5W-40 4T Synthetic (API SL / JASO MA)
Oil Capacity: 1.2 L (1.27 US qt) with filter
Drain Bolt Torque: 24 N·m (18 lbf·ft)
Spark Plug: NGK MR8BI-8 / Champion RG4PHP
Spark Plug Gap: 0.7–0.8 mm (0.028–0.031 in)
Service Interval: 10,000 km (6200 mi) / 12 mo
Cold Tire Pressures (Front / Rear): Front: 200 kPa (29 psi / 2.0 bar)Rear: 220 kPa (32 psi / 2.2 bar) solo / 260 kPa (38 psi / 2.6 bar) with pillion

Periodic Maintenance Schedule

Recommended factory inspection and replacement intervals under normal riding conditions

Service Item	Action	Distance Interval	Time Interval	Notes / Source
Initial Break-in Service (Oil & Filter)Break-in	replace	1,000 km(600 mi)	1 mo	Initial service at 1,000 km
Engine Oil & Filter	replace	10,000 km(6,000 mi)	12 mo	1.2 L 5W-40 Synthetic with filter cartridge
Hub Transmission Oil	replace	10,000 km(6,000 mi)	24 mo	170 ml 80W-90 GL-4
Drive V-Belt	inspect	5,000 km(3,000 mi)	6 mo	Check width against 17.5 mm minimum
Drive V-Belt & Variator Rollers	replace	10,000 km(6,000 mi)	—	Mandatory replacement at 10,000 km
Spark Plug	replace	10,000 km(6,000 mi)	12 mo	NGK MR8BI-8
Air Cleaner Element	clean	5,000 km(3,000 mi)	6 mo	Factory manual requirement
Air Cleaner Element	replace	10,000 km(6,000 mi)	12 mo	Factory manual requirement
Valve Clearance	inspect	10,000 km(6,000 mi)	—	Inspect cold: In 0.10 mm / Ex 0.15 mm
Brake Fluid (DOT 4)	replace	—	24 mo	Replace every 2 years

Technical Specifications & Torque Values

Factory torque limits, fluid viscosities and adjustment clearances

Fluids & LubricantsViscosity & Capacities

Engine Oil Viscosity5W-40 Synthetic (API SL / ACEA A3 / JASO MA)

Engine Oil Capacity (with filter)1.2 L

Hub Transmission Oil170 ml (80W-90 API GL-4)

Fastener TorquesN·m (ft-lb)

Oil Drain Plug Torque24 N·m(18 lbf·ft)

Spark Plug Torque12 N·m(8.8 lbf·ft)

Engine & IgnitionClearances & Gaps

Spark PlugNGK MR8BI-8 (Iridium)

Valve Clearance (Intake)0.10 ± 0.02 mm

Valve Clearance (Exhaust)0.15 ± 0.02 mm

Chassis & TiresPressures & Sizing

Drive Belt Minimum Width17.5 mm (nominal 18.5 mm)

Front Tire Pressure200 kPa (2.0 bar)

Rear Tire Pressure220 kPa solo / 260 kPa pillion

Source & Provenance: Piaggio & C. SpA Vespa Sprint 150 (i-Get) Official Workshop Manual

Status: high confidence (checked 2026-10)

Titlemark maintains strict citations for all technical figures. Where factory service manuals are pending audit, conservative baseline service intervals are displayed and bolt torques are explicitly marked as "Not specified in source" to prevent overtightening.

Never miss a service on your Sprint 150.

Track wear bars, log mileage, and generate a tamper-evident maintenance passport that proves your bike's care when it is time to sell.

Track this Sprint 150 →