scooterFactory Verified Manual

Honda Wave 110i(2009–2011)

Official service intervals, fluid capacities, and torque specifications for the Honda Wave 110i. Source citation: A.P. Honda Official Wave 110i Workshop Service Manual.

Keep this schedule for your Wave 110i in Titlemark →

Quick Reference Specifications

Essential technical numbers for regular maintenance and routine oil changes

Dual Metric / Imperial

Engine Oil Type: 10W-30 JASO MA (API SG or higher)
Oil Capacity: 0.7 L (0.74 US qt) at draining / 0.8 L (0.85 US qt) at overhaul
Drain Bolt Torque: 24 N·m (18 lbf·ft)
Spark Plug: NGK CPR6EA-9
Spark Plug Gap: 0.8–0.9 mm (0.031–0.035 in)
Service Interval: 4,000 km (2500 mi) / 6 mo
Cold Tire Pressures (Front / Rear): Front: 200 kPa (29 psi)Rear: 225 kPa (33 psi) solo / 280 kPa (41 psi) with pillion

Periodic Maintenance Schedule

Recommended factory inspection and replacement intervals under normal riding conditions

Service Item	Action	Distance Interval	Time Interval	Notes / Source
Initial Break-in Service (Oil & Strainer)Break-in	replace	1,000 km(600 mi)	1 mo	Mandatory initial break-in service at 1,000 km
Engine Oil	replace	4,000 km(2,500 mi)	6 mo	Use JASO MA 10W-30 motorcycle oil
Centrifugal Oil Filter & Screen	clean	12,000 km(8,000 mi)	—	Remove right crankcase cover and clean centrifugal cup & screen
Drive ChainBreak-in	clean	1,000 km(600 mi)	1 mo	Clean, lubricate and adjust slack to 25–35 mm
Spark Plug	inspect	4,000 km(2,500 mi)	6 mo	Factory manual requirement
Spark Plug	replace	8,000 km(5,000 mi)	12 mo	NGK CPR6EA-9
Air Cleaner Element (Viscous Paper)	replace	16,000 km(10,000 mi)	—	Replace paper element; do not use compressed air
Valve Clearance	inspect	4,000 km(2,500 mi)	6 mo	Inspect and adjust while cold
Brake Shoes / Pads	inspect	4,000 km(2,500 mi)	6 mo	Factory manual requirement
Clutch Free Play	adjust	4,000 km(2,500 mi)	6 mo	Factory manual requirement

Technical Specifications & Torque Values

Factory torque limits, fluid viscosities and adjustment clearances

Fluids & LubricantsViscosity & Capacities

Engine Oil Viscosity10W-30 JASO MA (wet clutch safe)

Engine Oil Capacity (Drain)0.7 L

Engine Oil Capacity (Overhaul)0.8 L

Fastener TorquesN·m (ft-lb)

Oil Drain Bolt Torque24 N·m(18 lbf·ft)

Spark Plug Torque16 N·m(12 lbf·ft)

Front Axle Nut Torque54 N·m(40 lbf·ft)

Rear Axle Nut Torque59 N·m(44 lbf·ft)

Engine & IgnitionClearances & Gaps

Spark PlugNGK CPR6EA-9 (0.8–0.9 mm gap)

Valve Clearance (Intake)0.10 ± 0.02 mm

Valve Clearance (Exhaust)0.10 ± 0.02 mm

Chassis & TiresPressures & Sizing

Drive Chain Slack25–35 mm

Front Tire Pressure200 kPa (2.00 kgf/cm²)

Rear Tire Pressure225 kPa solo / 280 kPa pillion

Source & Provenance: A.P. Honda Official Wave 110i Workshop Service Manual

Status: high confidence (checked 2026-10)

Titlemark maintains strict citations for all technical figures. Where factory service manuals are pending audit, conservative baseline service intervals are displayed and bolt torques are explicitly marked as "Not specified in source" to prevent overtightening.

Never miss a service on your Wave 110i.

Track wear bars, log mileage, and generate a tamper-evident maintenance passport that proves your bike's care when it is time to sell.

Track this Wave 110i →